Chicago Faucets - 1" Tub Diverter Side Lever Stem Assembly
This stem assembly is used on 2 different Chicago Faucet bathtub spouts with 1" threads and side lever handle. This stem slips into the Flapper Seal and holds it in place. See the Diagram below for help with correct installation.
YOU MUST REMOVE SPOUT FROM THE WALL TO INSTALL THIS KIT!!
If you do not remove the diverter spout from the wall, the flapper seal will fall loose and cannot be repaired.
WE DO NOT OFFER ANY TECH SUPPORT ON THIS KIT
WE DO NOT ACCEPT ANY RETURNS OR EXCHANGES ON THIS ITEM.
Please make sure you know what to do with this assembly before purchasing.
This stem assembly is used on 2 different Chicago Faucet bathtub spouts with 1" threads and side lever handle. This stem slips into the Flapper Seal and holds it in place. See the Diagram below for help with correct installation.
YOU MUST REMOVE SPOUT FROM THE WALL TO INSTALL THIS KIT!!
If you do not remove the diverter spout from the wall, the flapper seal will fall loose and cannot be repaired.
WE DO NOT OFFER ANY TECH SUPPORT ON THIS KIT
WE DO NOT ACCEPT ANY RETURNS OR EXCHANGES ON THIS ITEM.
Please make sure you know what to do with this assembly before purchasing.
